Danfoss ADAP-KOOL AKD 102 Operating Instructions Manual

Also see for ADAP-KOOL AKD 102: Operating instructions

Danfoss ADAP-KOOL AKD 102 Operating Instructions Manual Manual pdf 17 page image

3.1.2 Application DescriptionsThe AKD Wizard is structured into three basic applications:• Compressor• Multi condenser fan• Single fan and pumpThese applications are then further expanded to allow control of the drive to be controlled via the drives own internal PIDcontrollers or from an external control signal.CompressorThe wizard guides the user through the set up of a refrigeration compressor by asking him to input data about thecompressor and the refrigeration system on which the drive will be running. All terminology and units used within thewizard are common refrigeration type and set up is thus completed in 10-15 easy steps using just two buttons of the driveslocal control panel.Illustration 3.1 Standard drawing of “Compressor with internal control”Single or multiple fans or pumpsThe wizard guides the user through the set up of a refrigeration condenser fan or pump by asking him to input data aboutthe condenser or pump and the refrigeration system on which the drive will be running. All terminology and units usedwithin the wizard are common refrigeration type and set up is thus completed in 10-15 easy steps using just two buttons ofthe drives local control panel.Illustration 3.2 Speed control using analogue reference (open loop) – single fan or pump / multiple fans or pumps in parallelApplication Guide ADAP-KOOL® Drive Operating InstructionsMG.11.L4.02 - ADAP-KOOL® Drive 173 3