Danfoss AHF 005 Operating Instructions Manual

Also see for VLT AHF 005: Instruction manual Operating instructions Design guide Design guide

Contents

Danfoss AHF 005 Operating Instructions Manual Manual pdf 15 page image

4 Installation4.1.1 Mechanical InstallationThe encapsulation of the filters have an IP 20 rating. The filters can bemounted side by side with 60 mm (2,36 inches) clearance.To other components and to the cabinet walls keep a horizontal clearanceof at least 70 mm (2,76 inches) and a vertical clearance of at least 150mm (5,91 inches).Only vertical installation is allowed (mains terminal at bottom).For versions with bus bars (frame size E – H) it is nec-essary to mount the added covers to the connectors inorder to achieve the protection type IP 20.Illustration 4.1: Clearance surrounding the AHF filterBelow picture series shows mounting principles. All filters in frame E to H have to be mounted with an added terminal kit to comply with IP20 enclosurerating. Please make sure that the terminal plastic cover back plate (see photo below) is mounted and fixed correctly before adding the terminal cover.AHF 005/010 Operating Instructions 4 InstallationMG.80.C2.02 - VLT® is a registered Danfoss trademark 154