VI.KT.Y2.02 © Danfoss | 2016.02 | 7Depending on the chosen circuit and mode,it is possible to enter all daily settingsdirectly in the overview displays.Setting the desired room temperatureThe desired room temperature can easilybe adjusted in the overview displays for theheating circuit.Action: Purpose: Examples:Desired room temperature 20.5ConfirmAdjust the desired roomtemperature 21.0ConfirmMode: ComfortActualoutdoortemp.Actualroomtemp.Desired room temp.If you want to change the desired roomtemperature for saving mode, choose themode selector and select saving mode. The setting of the desired roomtemperature is important even if a roomtemperature sensor / Remote Control Unitis not connected.Setting the desired DHW temperatureThe desired DHW temperature can easilybe adjusted in the overview display for theDHW circuit.Action: Purpose: Examples:Desired DHW temperature 50ConfirmAdjust the desired DHWtemperature 55ConfirmMode: ScheduledActualDHWtemp.Desired DHW temp.In addition to the information about desiredand actual DHW temperature, today’sschedule is visible.Setting the desired room temperature,ECA 30 / ECA 31With the ECA 30 / ECA 31 you can overridethe desired room temperature set in thecontroller temporarily by means of theoverride functions:The desired temperature can be set as in thecontroller. However, other symbols can bepresent in the display (please see the pageabout symbols).4.0 Setting the temperatures