Danfoss ECL Comfort 310 Installation Manual

Also see for ECL Comfort 210: Installation guide User guide Installation guide Operating guide Installation guide

Danfoss ECL Comfort 310 Installation Manual Manual pdf 9 page image

Installation Guide ECL Comfort 210, application A2602.3 Mounting2.3.1 Mounting the ECL Comfort controllerFor easy access, you should mount the ECL Comfort controller nearthe system. Select one of the following methods using the samebase part (code no. 087H3220):• Mounting on a wall• Mounting on a DIN rail (35 mm)ECL Comfort 210 can be mounted in an ECL Comfort 310 base part(for future upgrade).Screws, PG cable glands and rawlplugs are not supplied.Locking the ECL Comfort controllerIn order to fasten the ECL Comfort controller to its base part, securethe controller with the locking pin.To prevent injuries to persons or the controller, the controller has tobe securely locked into the base. For this purpose, press the lockingpin into the base until a click is heard and the controller no longercan be removed from the base.If the controller is not securely locked into the base part, there is a riskthat the controller during operation can unlock from the base and thebase with terminals (and also the 230 V a.c. connections) are exposed.To prevent injuries to persons, always make sure that the controlleris securely locked into its base. If this is not the case, the controllershould not be operated!The easy way to lock the controller to its base or unlock it is to use ascrew driver as lever.Danfoss District Energy VI.LG.F1.02 DEN-SMT/DK 9