Danfoss ECL Comfort 310 Operating Manual
Also see for ECL Comfort 310: Installation guideInstallation guideInstallation guideInstallation guideMounting guide
                                                                                                                                                                 | |
Contents
| 
4.0 Settings overviewFor factory settings and setting range, see appendix “Parameter ID overview”.Parameters indicated with an ID no. like "1x607" mean a universal parameter. x stands for circuit / parameter group.Setting ID Page Factory settings in circuit(s)1 2 3Heat curve 65Ext. desired T — (ECL Comfort 310) 67Actual (actual flow or power) 79Extended heat cut-out setting 104Extended winter cut-out setting 104Day 116Start time 116Duration 117Desired T 117Desired T (Desired flow temperature) 1x004 66ECA addr. (ECA address, choice of Remote Control Unit) 1x010 93Auto saving (saving temp. dependent on outdoor temp.) 1x011 82Boost 1x012 83Ramp (reference ramping) 1x013 84Optimizer (optimizing time constant) 1x014 84Adapt. time (adaption time) 1x015 69Demand offset 1x017 93Based on (optimization based on room / outdoor temp.) 1x020 85Total stop 1x021 85P exercise (pump exercise) 1x022 94M exercise (valve exercise) 1x023 94Actuator 1x024 90Pre-stop (optimized stop time) 1x026 86Con.T, re. T lim. (Constant temperature mode, returntemperature limitation) 1x028 73DHW, ret. T limit 1x029 74Limit (return temp. limitation) 1x030 74High T out X1 (return temp. limitation, high limit, X-axis) 1x031 74Low limit Y1 (return temp. limitation, low limit, Y-axis) 1x032 75Low T out X2 (return temp. limitation, low limit, X-axis) 1x033 75High limit Y2 (return temp. limitation, high limit, Y-axis) 1x034 75Infl. - max. (return temp. limitation - max. influence) 1x035 75Infl. - min. (return temp. limitation - min. influence) 1x036 76Adapt. time (adaptation time) 1x037 77P post-run 1x040 95Char. P post-run (DHW charging pump, post-run) 1x042 95Parallel operation 1x043 86P demand 1x050 95DHW priority (closed valve / normal operation) 1x052 9662 | © Danfoss | 2017.10 VI.GU.F6.02Operating Guide ECL Comfort 310, application A377 |
Related manuals for Danfoss ECL Comfort 310
Danfoss ECL Comfort 310 Operating Manual
Danfoss ECL Comfort 310 Operating Manual
Danfoss ECL Comfort 110 Operating Manual
Danfoss ECL Comfort 210 Operating Manual
Danfoss ECL Comfort 210 Operating Manual
Danfoss ECL Comfort 110 Operating Manual
Danfoss ECL Comfort 210 Operating Manual
Danfoss ECL Comfort 296 Operating Manual
Danfoss ECL Comfort 120 Operating Manual
Danfoss ECL Comfort 296 Operating Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine