Danfoss MCD 600 Installation Manual

Contents

6 Supported Modes6.1 PROFIBUS Freeze ModeIn Freeze Mode, inputs are only updated with new data from the soft starter when another Freeze action is carried out. An unfreezeaction returns the device to normal operation.6.2 PROFIBUS Sync ModeIn Sync Mode, commands to the soft starter are not processed until another sync action is carried out. An unsync action returns thedevice to normal operation.6.3 PROFIBUS Clear ModeIf the Master sends a global clear command, the device sends a quick stop command to the soft starter.Supported ModesInstallation Guide | PROFIBUS CardAQ277154583779en-000101 / 175R1181 | 17Danfoss A/S © 2018.09