Danfoss PLUS+1 Technical Information

Also see for PLUS+1 Series: Technical information Technical information

Contents

Technical Information Transit Mixer Controller (TMC)11061324 • Rev CA • Sep 20139Product SpecificationsEnvironmentalTesting CriteriaGeneral PLUS+1 Module RatingsDescription Units Minimum Maximum CommentOperating temperature ˚C [˚F] -40 [-40] 70 [158]Storage temperature ˚C [˚F] -40 [-40] 85 [185]Allowable module supply voltage Vdc 9 36Module sensor supply voltage Vdc 4.88 5.12 All current returns must be directly wiredto the machine ground to reduce anyvoltage losses to the sensor power line.Failure to comply may result in a sensorpower voltage lower than the specifiedminimum.Analog input voltage levels Vdc 36Allowable output load current(per pin)A 8TMC allowable total output current A 11.5IP rating(with mating connector attached) IP 69K (front)IP 67* (rear)CE rating CE compliant* PLUS+1 module IP 67 rating is only valid when the module mating connector is in place and unused connector pin positionshave sealing plugs installed.Testing CriteriaClimate EnvironmentDescription Applicable standard CommentStorage temperature IEC 60068-2-1, test Ab, IEC60068-2-2 test BbOperating temperature IEC 60068-2-1, test Ab, IEC60068-2-2 test BdThermal cycle IEC 60068-2-2, test Na, IEC60068-2-38 (partial)Humidity IEC 60068-2-78, IEC60068-2-30 test DbDamp heat steady state and cyclic.Degree of protection IEC 60529Chemical EnvironmentDescription Applicable standard CommentSalt mist IEC 60068-2-58 test KbChemical resistance ISO 16750-5Mechanical EnvironmentDescription Applicable standard CommentVibration IEC 60068-2-6 test Fc,IEC6008-2-64 test FhBump IEC 60068-2-29 test EbShock IEC 60068-2-27 test EaFree fall IEC 60068-2-32 test Ed