Danfoss Series 90 Technical Information

Also see for Series 90: Installation Service manual

Contents

Danfoss Series 90 Technical Information Manual pdf 70 page image

Frame Size 130Manual Displacement Control (MDC), end cap twin ports, option 80BØ 6.73[Ø 0.265]R 25.4[R 1.00]R 50.8[R 2.00]2x"B""A"30°minimum30°minimumNeutralpositionTorque applied to control handle shaftnot to exceed 17 N•m [150 lbf•in]MaximumdisplacementMaximumdisplacementManual displacement control handledimensionsGauge port M3charge pressure9/16-18UNF-2BMultifunctionvalveCharge pressurerelief valveView "X"MultifunctionvalveGauge port M4servo pressure9/16-18UNF-2B7.9 [0.31]111[4.37]View "Y"Port L1case drainuse highestport as outlet1-5/16-12UN-2B370[14.58]101.5[4.00]209.3[8.24]Gauge port M5servo pressure9/16-18UNF-2B48.8[1.92]80.8[3.181]161.6[6.36]100 [3.94]port L2111.6[4.39]184.5[7.26]Approximatecenter of gravityPort L2case drain1-5/16-12UN-2BView "Z"110.5[4.35]"W"Ø 20.6[Ø 0.81]RotationCCW CW(2x)(2x)16[0.63]166 [6.54]port L2 185[7.28]31.75[1.25]77[3.03]77[3.03]147.1 [5.79]port L1168.5[6.63]66.68[2.63]Gauge port M1System pressure A9/16-18UNF-2B300[11.81]Approximatecenter of gravityPort S: chargepump inlet1-5/8-12UN-2BGauge port M2System pressure B9/16-18UNF-2B9.4[0.37]"X""Z""Y"BA290[11.42]Ports A and B1- 1/4 - 6000 psisplit flange bossper SAE J518(Code 62)1/2-13UNC-2B23 [0.906]minimum full thread2M2M5 M4M1 AP102 052External charge plug1 5/16-12 UNF48[1.9] Ø152.4Ø[6]0-0.0[+0.000[-0.002]15[0.591]R0.8 max.[0.03][0.49] ±[0.01]12.45 ±0.25Technical Information Series 90 Axial Piston PumpsInstallation Drawings70 520L0603 • Rev 0804 • March 2016