Danfoss Heating 9GB1.7 Before you change the preset programmesYour installer will have set your unit to operate in one of the followingmodes:• 5/2 day - one set of programmes for weekdays and another forweekends (page 10-11)• 7 day - different settings for each day of the week.(page 11-12)• 24 hour - one set of programmes for the whole week.(page 13)See INSTALLER SETTING tick box on inside fl ap label to ascertainwhich mode your unit is set.Please NoteThe unit must be programmed in sequence. ON/OFF times cannotbe set out of sequence.If you want to leave a preset time as it is, simply press NEXT tomove on to the next setting.Your installer will have set your unit to programme either 2 or 3ON/OFFs per day. If your clock has been installed to allow 3 ON/OFFs and you do not wish to use one of the ON/OFF settings,simply programme the ON time to be the same as the OFF timeand the setting will not operate.INSTALLER SETTING24 Hour5+2 Day7 Day