Danfoss VLT 2010 Manual

Also see for VLT 2010: Manual

Contents

Danfoss VLT 2010 Manual Manual pdf 10 page image

11VLT ® Series 2000 OperationAll Danfoss VLT Series 2000 AC drives utilize the samecontrol card throughout the entire HP range. The VLT controlpanel consists of a keyboard and a display.The keyboard is used for two purposes: local control andprogramming. The display communicates VLT, motor andapplication information to the operator.Located on the control panel is a red and green status LED.When the green status LED is illuminated, there is AC powerapplied to the VLT. The red LED is used for alarm indications.In an ALARM MODE, the LED will flash.The display is a three-line LCD display. Line A is used foroperating displays. It shows the value corresponding to thesetting in DISPLAY MODE. The set value remains in thedisplay line during programming of parameters. Line Bshows information about parameters and direction of motoroperation. Line C shows information about status and setupor data value.VLT Control PanelMenuDataJog Fwd.Rev.StopReset Start+–Alarm On0000000000000060USE±00000000001560 Hz ABCArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com