1.9 PC SoftwareMCT 10 Set-up SoftwareAll frequency converters are equipped with a serialcommunication port. Danfoss provides a PC tool forcommunication between PC and frequency converter, VLTMotion Control Tool MCT 10 Set-up Software.MCT 10 Set-up Softwarehas been designed as an easy-to-use interactive tool for setting parameters in the frequencyconverters.The MCT 10 Set-up Software can be used for:• Planning a communication network off-line. MCT10 Set-up Software contains a completefrequency converter database.• Commissioning frequency converters on line.• Saving settings for all frequency converters.• Replacing a frequency converter in a network.• Expanding an existing network.• Supporting future developed frequencyconverters.MCT 10 Set-up Software support Profibus DP-V1 via amaster class 2 connection. It makes it possible to read/write parameters on-line in a frequency converter via theProfibus network. This eliminates the need for an extracommunication network.The MCT 10 Set-up Software can be downloaded at:www.danfoss.com/BusinessAreas/DrivesSolutions/Software-download/. Select the licensed version to use all functions,or the free version to use limited functions.MCT 31 Harmonic Calculation ToolThe MCT 31 Harmonic Calculation tool determines thedegree of voltage pollution on the grid and neededprecaution. Download the free MCT 31 HarmonicCalculation Tool from www.danfoss.com/BusinessAreas/DrivesSolutions/Softwaredownload/.Introduction to VLT 2800 Design Guide16 Danfoss A/S © Rev. May/2014 All rights reserved. MG27E40211
