1. How to Read this Design Guide1.1.1. How to Read this Design GuideThis Design Guide will introduce all aspects of your FC 300.Available literature for FC 300- The VLT® AutomationDrive FC 300 Operating Instructions MG.33.AX.YY provide the neccessary information for getting the drive up and running.- The VLT® AutomationDrive FC 300 Design Guide MG.33.BX.YY entails all technical information about the drive and customer design and appli-cations.- The VLT® AutomationDrive FC 300 Programming Guide MG.33.MX.YY provides information on how to programme and includes complete pa-rameter descriptions.- The VLT® AutomationDrive FC 300 Profibus Operating Instructions MG.33.CX.YY provide the information required for controlling, monitoringand programming the drive via a Profibus fieldbus.- The VLT® AutomationDrive FC 300 DeviceNet Operating Instructions MG.33.DX.YY provide the information required for controlling, monitoringand programming the drive via a DeviceNet fieldbus.X = Revision numberYY = Language codeDanfoss Drives technical literature is also available online at www.danfoss.com/BusinessAreas/DrivesSolutions/Documentations/Technical+Documenta-tion.1.1.2. SymbolsSymbols used in this guide.NB!Indicates something to be noted by the reader.Indicates a general warning.Indicates a high-voltage warning.* Indicates default settingFC 300 Design Guide 1. How to Read this Design GuideMG.33.BA.02 - VLT® is a registered Danfoss trademark 51
