Danfoss VLT AutomationDrive FC 300 Instruction Manual

Also see for VLT AutomationDrive FC 300: Instruction manual Operating instructions Design guide Service manual Operating instructions

Danfoss VLT AutomationDrive FC 300 Instruction Manual Manual pdf 67 page image

4.4 Parameter ListsChanges during operation”TRUE” means that the parameter can be changed while the adjustable frequency drive is in operation, and “FALSE” means that it must be stopped beforea change can be made.4 Set-up'All set-up': the parameters can be set individually in each of the four set-ups, i.e., one single parameter can have four different data values.’1 set-up’: the data value will be the same in all set-ups.Conversion indexThis number refers to a conversion figure used when writing or reading to and from the adjustable frequency drive.Conv. index 100 67 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 -6Conv. factor 1 1/60 1000000 100000 10000 1000 100 10 1 0.1 0.01 0.001 0.0001 0.00001 0.000001Data type Description Type2 Integer 8 Int83 Integer 16 Int164 Integer 32 Int325 Unsigned 8 Uint86 Unsigned 16 Uint167 Unsigned 32 Uint329 Visible String VisStr33 Normalized value 2 bytes N235 Bit sequence of 16 Boolean variables V254 Time difference w/o date TimDSee the adjustable frequency driveDesign Guide for further information about data types 33, 35 and 54.Parameters for the adjustable frequency drive are grouped into various parameter groups for easy selection of the correct parameters for optimizedoperation of the adjustable frequency drive.0-xx Operation and display parameters for basic adjustable frequency drive settings1-xx Load and motor parameters, includes all load and motor-related parameters2-xx Brake parameters3-xx References and ramping parameters, includes DigiPot function4-xx Limits warnings, setting of limits and warning parameters5-xx Digital inputs and outputs, includes relay controls6-xx Analog inputs and outputs7-xx Controls, setting parameters for speed and process controls8-xx Communication and option parameters, setting of FC RS485 and FC USB port parameters.9-xx Profibus parameters10-xx DeviceNet and CAN Serial Communication parametersVLT®AutomationDrive FC 300 InstructionManual 4 How to ProgramMG.33.AC.22 - VLT® is a registered Danfoss trademark 4-294