Danfoss VLT AutomationDrive FC 361 Operating Manual

Also see for VLT AutomationDrive FC 361: Service guide Programming guide Design guide Installation guide

Contents

Danfoss VLT AutomationDrive FC 361 Operating Manual Manual pdf 8 page image

3 Product Overview3.1 Intended UseThe drive is an electronic motor controller that converts AC mains input into a variable AC waveform output. The frequencyand voltage of the output are regulated to control the motor speed or torque. The drive is designed to:• Regulate motor speed in response to system feedback or to remote commands from external controllers.• Monitor system and motor status.• Provide motor overload protection.The drive is designed for industrial and commercial environments in accordance with local laws and standards. Dependingon configuration, the drive can be used in standalone applications or form part of a larger system or installation.NOTICEIn a residential environment, this product can cause radio interference, in which case supplementary mitigationmeasures can be required.Foreseeable misuseDo not use the drive in applications which are non-compliant with specified operating conditions and environments. Ensurecompliance with the conditions specified in chapter 10 Specifications.3.2 Power Ratings, Weights, and DimensionsFor enclosure sizes and power ratings of the drives, refer to Table 3.1. For more dimensions, see chapter 10.9 EnclosureDimensions.Enclosure size J8 J9IPNEMA20Chassis20ChassisShipping dimensions [mm (in)] Height 587 (23) 587 (23)Width 1230 (48) 1430 (56)Depth 460 (18) 535 (21)Drive dimensions [mm (in)]Height 1026.5 (40.4) 1293.78 (50.9)Width 250.0 (9.8) 350.0 (13.8)Depth 375.0 (14.8) 375.0 (14.8)Maximum weight [kg (lb)] 101.2 (223.1) 168.6 (376.1)Table 3.1 Power Ratings, Weight, and Dimensions, Enclosure Sizes J8–J9, 380–480 VProduct Overview VLT® AutomationDrive FC 3616 Danfoss A/S © 06/2018 All rights reserved. MG06I10233