Danfoss VLT FC 100 Operating Instructions Manual

Also see for VLT FC 100: Service manual Instruction manual

Contents

Danfoss VLT FC 100 Operating Instructions Manual Manual pdf 135 page image

6.2.2 0-** Operation and DisplayPar.No. #Parameter description Default value 4-set-up Changeduring op-erationConver-sion indexType0-0* Basic Settings0-01 Language [0] English 1 set-up TRUE - Uint80-02 Motor Speed Unit [1] Hz 2 set-ups FALSE - Uint80-03 Regional Settings [0] International 2 set-ups FALSE - Uint80-04 Operating State at Power-up [0] Resume All set-ups TRUE - Uint80-05 Local Mode Unit [0] As Motor Speed Unit 2 set-ups FALSE - Uint80-1* Set-up Operations0-10 Active Set-up [1] Set-up 1 1 set-up TRUE - Uint80-11 Programming Set-up [9] Active Set-up All set-ups TRUE - Uint80-12 This Set-up Linked to [0] Not linked All set-ups FALSE - Uint80-13 Readout: Linked Set-ups 0 N/A All set-ups FALSE 0 Uint160-14 Readout: Prog. Set-ups / Channel 0 N/A All set-ups TRUE 0 Int320-2* LCP Display0-20 Display Line 1.1 Small 1602 All set-ups TRUE - Uint160-21 Display Line 1.2 Small 1614 All set-ups TRUE - Uint160-22 Display Line 1.3 Small 1610 All set-ups TRUE - Uint160-23 Display Line 2 Large 1613 All set-ups TRUE - Uint160-24 Display Line 3 Large 1502 All set-ups TRUE - Uint160-25 My Personal Menu ExpressionLimit 1 set-up TRUE 0 Uint160-3* LCP Custom Readout0-30 Custom Readout Unit [1] % All set-ups TRUE - Uint80-31 Custom Readout Min Value ExpressionLimit All set-ups TRUE -2 Int320-32 Custom Readout Max Value 100.00 CustomReadoutUnit All set-ups TRUE -2 Int320-37 Display Text 1 0 N/A 1 set-up TRUE 0 VisStr[25]0-38 Display Text 2 0 N/A 1 set-up TRUE 0 VisStr[25]0-39 Display Text 3 0 N/A 1 set-up TRUE 0 VisStr[25]0-4* LCP Keypad0-40 [Hand on] Key on LCP [1] Enabled All set-ups TRUE - Uint80-41 [Off] Key on LCP [1] Enabled All set-ups TRUE - Uint80-42 [Auto on] Key on LCP [1] Enabled All set-ups TRUE - Uint80-43 [Reset] Key on LCP [1] Enabled All set-ups TRUE - Uint80-44 [Off/Reset] Key on LCP [1] Enabled All set-ups TRUE - Uint80-45 [Drive Bypass] Key on LCP [1] Enabled All set-ups TRUE - Uint80-5* Copy/Save0-50 LCP Copy [0] No copy All set-ups FALSE - Uint80-51 Set-up Copy [0] No copy All set-ups FALSE - Uint80-6* Password0-60 Main Menu Password 100 N/A 1 set-up TRUE 0 Int160-61 Access to Main Menu w/o Password [0] Full access 1 set-up TRUE - Uint80-65 Personal Menu Password 200 N/A 1 set-up TRUE 0 Int160-66 Access to Personal Menu w/o Password [0] Full access 1 set-up TRUE - Uint80-7* Clock Settings0-70 Date and Time ExpressionLimit All set-ups TRUE 0 TimeOfDay0-71 Date Format ExpressionLimit 1 set-up TRUE - Uint80-72 Time Format ExpressionLimit 1 set-up TRUE - Uint80-74 DST/Summertime [0] Off 1 set-up TRUE - Uint80-76 DST/Summertime Start ExpressionLimit 1 set-up TRUE 0 TimeOfDay0-77 DST/Summertime End ExpressionLimit 1 set-up TRUE 0 TimeOfDay0-79 Clock Fault ExpressionLimit 1 set-up TRUE - Uint80-81 Working Days ExpressionLimit 1 set-up TRUE - Uint80-82 Additional Working Days ExpressionLimit 1 set-up TRUE 0 TimeOfDay6 How to ProgrammeVLT HVAC Drive High Power Operating In-structions134 MG.11.F3.02 - VLT® is a registered Danfoss trademark6