Danfoss VLT FC 103 Operating Instructions Manual

Also see for VLT FC 103: Service guide Installation guide Installation guide Operating guide Installation guide

Contents

Danfoss VLT FC 103 Operating Instructions Manual Manual pdf 72 page image

2. Scroll to parameter group 5-1* Digital Inputs andpress [OK].130BT769.105-0* Digital I/O mode5-1* Digital Inputs5-4* Relays5-5* Pulse Input14.7% 0.00A 1(1)Digital In/Out 5-**Illustration 6.10 Parameter Group Display Example3. Scroll to 5-10 Terminal 18 Digital Input. Press [OK]to access function choices. The default settingStart is shown.5-1*130BT770.105-10 Terminal 18 DigitalInput[8]] Start14.7% 0.00A 1(1)Digital InputsIllustration 6.11 Function Choice Display Example6.4 International/North American DefaultParameter SettingsSetting 0-03 Regional Settings to [0] International or [1]North America changes the default settings for someparameters. Table 6.1 lists those parameters that areeffected.Parameter International defaultparameter valueNorth Americandefault parametervalue0-03 RegionalSettingsInternational North America0-71 Date Format DD-MM-YYYY MM/DD/YYYY0-72 Time Format 24 h 12 h1-20 Motor Power[kW]See Note 1 See Note 11-21 Motor Power[HP]See Note 2 See Note 21-22 Motor Voltage 230 V/400 V/575 V 208 V/460 V/575 V1-23 MotorFrequency50 Hz 60 Hz3-03 MaximumReference50 Hz 60 Hz3-04 ReferenceFunctionSum External/PresetParameter International defaultparameter valueNorth Americandefault parametervalue4-13 Motor SpeedHigh Limit [RPM]See Note 31500 RPM 1800 RPM4-14 Motor SpeedHigh Limit [Hz]See Note 450 Hz 60 Hz4-19 Max OutputFrequency100 Hz 120 Hz4-53 Warning SpeedHigh1500 RPM 1800 RPM5-12 Terminal 27Digital InputCoast inverse External interlock5-40 Function Relay [2] Drive ready No alarm6-15 Terminal 53High Ref./Feedb.Value50 606-50 Terminal 42OutputOutput frequency Speed 4-20 mA14-20 Reset Mode Manual reset Infinite auto reset22-85 Speed atDesign Point [RPM]See Note 31500 RPM 1800 RPM22-86 Speed atDesign Point [Hz]50 Hz 60 HzTable 6.1 International/North American Default ParameterSettingsNote 1: 1-20 Motor Power [kW] is only visible when 0-03 RegionalSettings is set to [0] International.Note 2: 1-21 Motor Power [HP], is only visible when 0-03 RegionalSettings is set to [1] North America.Note 3: This parameter is only visible when 0-02 Motor Speed Unit isset to [0] RPM.Note 4: This parameter is only visible when 0-02 Motor Speed Unit isset to [1] Hz.Note 5: The default value depends on the number of motor poles. Fora 4 poled motor, the international default value is 1500 RPM and fora 2 poled motor, 3000 RPM. The corresponding values for NorthAmerica is 1800 and 3600 RPM.Changes made to default settings are stored and availablefor viewing in the Quick Menu along with anyprogramming entered into parameters.1. Press [Quick Menu].2. Scroll to Q5 Changes Made and press [OK].3. Select Q5-2 Since Factory Setting to view allprogramming changes or Q5-1 Last 10 Changesfor the most recent.Programming Operating Instructions70 Danfoss A/S © Rev. 05/2014 All rights reserved. MG16J20266