11 Specifications11.1 NameplateCheck the nameplate and compare it with the order data.Use the part number for reference.The part number uniquely identifies the connection box.130BD169.10ISD Connection BoxMade in GermanyUin: 300VDCConnection Box:Iin/max: 10ADCPART NO: 175G7760 SERIAL NO : 000402M352175G776000000M000Ambient: 5...40 C/41...104 Fo oEnclosure: IP 20ooUout: 300VDCIout/max: 10ADCPout/max: 3000W123694578Illustration 11.1 NameplateThe following data is shown on the nameplate of the ISDconnection box:1 Input voltage 6 Ambient temperaturerange2 Max. input current 7 Protection rating3 Output voltage 8 Part number4 Max. output current 9 Serial number5 Max. output powerTable 11.1 Legend to Illustration 11.1Ensure that the nameplate is clearly legible.11.2 StorageStore the connection box in a dry, dust-free location withlow vibration (Veff ≤0.2 mm/s).The storage location must be free from corrosive gases.Avoid sudden temperature changes.11.3 Characteristic DataDefinition Value and UnitInputInput voltage 300 V DCConnections +300 V DC, –300 V DC, PEInput current DC 10 AFuse protection External via line protectionPower factor 94%Output (with use of ISD Power Supply Module)Output voltage line 1 300 V DCOutput voltage line 2 300 V DCTolerance ±1%Ripple 1 VppRated power 3.0 kWRated current 10 A 1)Environmental ConditionsClimatic classification 3K3Mounting In a control cabinetAmbient temperature 5–40 °CHumidity 5-85%, non-condensing(according to IEC 60721-3-3)Cooling Via vents on housingProtection type IP20Protection rating 1 with PE connectionOver-voltage category IIIVibration rating 3M4Mechanical ConditionsDegree of pollution 2Safety Standards EN 61508HousingMaterial Steel, aluminium for wall mountingDimensions (W x H x D) 130 x 268 x 200 mmWeight 5 kgTable 11.2 Characteristic Data1) Only if 10 A is fed inSpecifications VLT® ISD Connection Box Operating InstructionsMG75G102 - VLT® is a registered Danfoss trademark 4511 11