Danfoss VLT LCP 11 Installation Instructions Manual

Also see for VLT LCP 11: Installation instructions

Contents

installation instructions

Danfoss VLT LCP 11 Installation Instructions Manual Manual pdf 1 page image

IP55 rated remote mounting kit for mounting of VLTp ControlPanel of type LCP 11, LCP 12 and LCP 21.Items supplied• Sealing gasket• Mounting bracket• Mounting screws• Cable (3 m)Mounting1. Fit the sealing gasket on the LCP.Illustration 1.1 Example: Gasket on LCP2. Cut out section of panel and locate the LCP in thecut-out.Illustration 1.2 Dimensions1 Panel cut outPanel thickness: 1-3 mmTable 1.1 Legend to Illustration 1.2Illustration 1.3 Example: LCP on Mounting Plate1 Mounting plate2 Gasket3 LCPTable 1.2 Legend to Illustration 1.33. Slide the mounting bracket into place on thebackside of the LCP and fasten it with screws.Illustration 1.4 Mounting Bracket on LCPInstallation InstructionsVLTp LCP Remote Mounting KitMI02C202 - VLTp is a registered Danfoss trademark 1

/ 2

Related manuals for Danfoss VLT LCP 11