Danfoss VLT Refrigeration Drive FC 103 Programming Manual

Also see for VLT FC 103: Service guide Installation guide Installation guide Operating guide Installation guide

Contents

Danfoss VLT Refrigeration Drive FC 103 Programming Manual Manual pdf 24 page image

The middle section on the display shows the parameternumber and name, as well as the selected parametervalue.130BP067.10740RPM0 -01 Language[0] English10.64A 1 [1]0-0*Basic SettingsIllustration 2.23 Parameter Selection2.1.8 Changing DataPress [OK] to change the selected parameter. Theprocedure for changing data depends on whether theselected parameter represents a numerical data value or atext value.2.1.9 Changing a Text ValueIf the selected parameter is a text value, change the textvalue with the [▲] [▼] keys.Place the cursor on the value that should be saved andpress [OK].130BP068.10740RPM0 -01 Language[0] English10.64 A 1 [1]0-0*Basic SettingsIllustration 2.24 Changing a Text Value2.1.10 Changing a Group of Numeric DataValuesIf the selected parameter represents a numeric data value,change the data value pressing the [◀] [▶] navigation keys,as well as the [▲] [▼] navigation keys. Press [◀] [▶] keys tomove the cursor horizontally.130BP069.101- 6*113 RPM 1.78 A 1(1)Load depen. setting1 - 60 Low speed loadcompensation100%Illustration 2.25 Changing a Group of Numeric Data ValuesPress the [▲] [▼] keys to change the data value. [▲]increases the data value, and [▼] decreases the data value.Place the cursor on the value to save and press [OK].130BP070.101 - 60 Low speed loadcompensation1 0%Load depen. setting 1- 6*729RPM 6.21A 1(1)6Illustration 2.26 Changing a Group of Numeric Data Values2.1.11 Value, Step-by-stepCertain parameters can be changed step by step. Thisapplies to:• Parameter 1-20 Motor Power [kW].• Parameter 1-22 Motor Voltage.• Parameter 1-23 Motor Frequency.The parameters are changed both as a group of numericdata values and as numeric data values that are infinitelyvarying.2.1.12 Read out and Programming ofIndexed ParametersParameters are indexed when placed in a rolling stack.Parameter 15-30 Alarm Log: Error Code toparameter 15-33 Alarm Log: Date and Time contain a faultlog which can be read out. Select a parameter, press [OK],and use the [▲]/[▼] navigation keys to scroll through thevalue log.Use parameter 3-10 Preset Reference as another example:Select the parameter, press [OK], and use the [▲]/[▼]navigation keys to scroll through the indexed values. Tochange the parameter value, select the indexed value andpress [OK]. To change the value, press the [▲]/[▼] keys.Press [OK] to accept the new setting. Press [Cancel] toabort. Press [Back] to leave the parameter.2.1.13 Initialization to Default SettingsInitialize the frequency converter to default settings in 2ways.Recommended initialization (viaparameter 14-22 Operation Mode)1. Select parameter 14-22 Operation Mode.2. Press [OK].3. Select [2] Initialization.How to Program VLT® Refrigeration Drive FC 10322 Danfoss A/S © 05/2016 All rights reserved. MG16H20222