Danfoss vlt series Operating Instructions Manual

Also see for VLT AutomationDrive FC 302: Service guide Programming guide Instruction manual Installation guide Operating guide

Contents

Danfoss vlt series Operating Instructions Manual Manual pdf 26 page image

3.2.4.5 Rectifier, Enclosure Sizes F10, F11, F12, and F1343239.6 [ 9.43 ]0.0 [ 0.00 ]0.0 [ 0.00 ]160.0 [ 6.30 ]56.6 [ 2.23 ]39.8 [ 1.57 ]91.8 [ 3.61 ]174.1 [ 6.85 ]226.1 [ 8.90 ]130BB534.11R2/L12R1/L1191-191S2/L22S1/L2192-1 T2/L32 93-192 T1/L31 93U/T1 96 V/T2 97 W/T3 980.0 [ 0.00 ]57.6 [ 2.27 ]74.0 [ 2.91 ]100.4 [ 3.95 ]139.4 [ 5.49 ]172.6 [ 6.80 ]189.0 [ 7.44 ]199.4 [ 7.85 ]287.6 [ 11.32 ]304.0 [ 11.97 ]407.3 [ 16.04 ]464.4 [ 18.28 ]522.3 [ 20.56 ]524.4 [ 20.65 ]629.7 [ 24.79 ]637.3 [ 25.09 ]1 21 Left side view2 Front view3 Right side view4 Ground barIllustration 3.17 Terminal Locations – Left, Front, and Right Views. The gland plate is 42 mm (1.65 in) below 0.0 level.How to Install VLT® AutomationDrive FC 30224 Danfoss A/S © 04/2016 All rights reserved. MG34Q40233