Danish Interpretation Systems DCS 6000 User Manual

Also see for CU 6010: User manual

Danish Interpretation Systems DCS 6000 User Manual Manual pdf 10 page image

Danish Interpretation Systems User ManualManual 01 18 0443810Back Panel LayoutBack Panel Connectors Mains Power connectorConnection for mains power. See specs. Analog Audio Line inputXLR Input connector.For connection of external Line input signal i.e. theFloor (Speaker) signal from another ConferenceMicrophone System or audio mixers. See specs. Analog Audio Line output.XLR Output connector.This connector carries the “Floor” signal. It is usedeither for recording purposes or for feeding signalto an external loudspeaker system. See specs. Serial Data Communication RS232D-Sub9 connectorRS232 Serial connection for communication to PCetc. Either the RS232 or the RS422 can be used. Serial Data Communication RS422D-Sub 9 connectorRS422 Serial connection for communication to PCetc. Either the RS232 or the RS422 can be used. Chain A1 & A2RJ45 connector, 2 piecesDCS-LAN connectors for connection to DM/CM6xxx, IS 6032, IS 6132, CS 6032, EX 6010, AO6008 etc. For connecting Interpreter Sets for up to16 languages. If more languages are required,Interpreter sets for those languages have to beconnected to Chain B1 or B2. Chain B1 & B2RJ45 connector, 2 piecesDCS-LAN connectors for connection to DM/CM6xxx, IS 6032, IS 6132, CS 6032, EX 6010, AO6008 etc. For connecting Interpreter Sets for up to16 languages. If more languages are required,Interpreter sets for those languages have to beconnected to Chain A1 or A2. Power LED’sThose LED’s light up when Power is available onthe connector next to the LED and only if thevoltage is over 24V (not overloaded).System settingsControl of the system settings is done throughselections made in the main menu. Pressing theMenu button will show the Main menu, whichcomprises the following entries:• Audio control• Delegate setup• Interpretation setup• Ambient Microphone• Units info• RS232 setup• Security setup• Configuration• License info• Firmware info