3Get StartedELPHA II 1000 has 2 output channels; channel A and B. Both channels are operated alike.1. Retract the sliding lid. Insert the battery and replace thelid.2. Connect the lead wires to the output channels on thedevice.3. Connect the lead wires to the electrodes.4. Clean the skin. Remove the plastic cover from theelectrodes before attaching to the skin. The electrodesmust not touch each other.5. Turn on the ELPHA II 3000 by pressing the blue on/offbutton.6. Choose programme and adjust the stimulation level.When the keyboard lock symbol appears , turndown the level to allow further adjustment of therequired stimulation level.7. The stimulation automatically stops when treatmenttime expires.-+