Dante DN9131 Installation And Operation Manual
                    | |
4. Operation Description4.1. Factory Default SettingsFactory default settings are set as follows:• IP address: 192.168.xx.yy (refer to 2.3 Serial Number / MAC Address)• Mask: 255.255.0.0• Gateway: 192.168.0.1• User ID: root• Password: passxx yy xx yyMAC address = 00-13-23-01-23-45 → IP address = 192.168.35.69To Convert Hexadecimal numbers to Decimal numbers, use PC calculator.In Calculator Menu:1. Click View and select Scientific version2. Next select Hex to convert digits xx - use keypad input number ex: 233. Next select Dec and get result = 354. Repeat for digits yy – select Hex, input number ex: 455. Next select Dec and get result = 69To perform the FD (Factory Default) initialization:1. Turn on the power (The status LED is on).2. Press and hold the Reset button within 1 second.3. Release the Reset button after 3 seconds.4.2. RebootingTo reboot the system:1. While the camera is in use, press and hold the Reset button. (Both Statusand Network LEDs are on.)2. Release the Reset button after 3 seconds.Convert the Hexadecimal number to Decimal number |
Related manuals for Dante DN9131
manualsdatabase
Your AI-powered manual search engine