Dante DNA1355V Installation And Operation Manual

Contents

Dante DNA1355V Installation And Operation Manual Manual pdf 14 page image

104444 WebWebWebWeb OperatioOperatioOperatioOperationnnnThis series DNA1155 product support the Web access and management via PC.Web includes several modules includes monitor channel preview, PTZ control, systemconfiguration, alarm and etc.4.14.14.14.1 Network ConnectionNetwork ConnectionNetwork ConnectionNetwork ConnectionPlease follow the steps listed below for network connection. Make sure the IP Cam has connected to the network properly. Please set the IP address, subnet mask and gateway of the PC and the IP Cam respectively.IP Cam default IP address is 192.168.1.108. Subnet mask is 255.255.255.0. Gateway is192.168.1.1 Use order ping ***.***.***.***(* IP camera address) to check connection is OK or not.4.24.24.24.2 Login and LogoutLogin and LogoutLogin and LogoutLogin and LogoutOpen IE and input IP camera address in the address bar.For example, if your camera IP is 192.168.1.108, then please input http:// 192.168.1.108 in IEaddress bar. See Figure 4-1.Figure 4-1The login interface is shown as below. See Figure 4-2.Please input your user name and password.Default factory name is admin and password is admin.Note: For security reasons, please modify your password after you first login.Input your IPaddress here

/ 17

Related manuals for Dante DNA1355V