Dantherm CDP 35 Service Manual

Also see for CDP 35: Service manual Service manual

Contents

Dantherm CDP 35 Service Manual Manual pdf 23 page image

23975675 • Version 2.2 • 01.06.2007Mounting and installation instructionsIntroduction This section contains all necessary information for correct mounting of the duct kit andthe dehumidifier.The electrical installation is described at the end of this section.Mounting ofCDP 35/45/65Please follow this procedure to mount the CDP 35/45/65:Step Action1 Fix the wall suspension bar supplieswith the unit to the wall. It isimportant to fix it horizontally in orderto ensure correct condensate outlet.Recommended distance fromdehumidifier to:Ceiling: 225 mmFloor: 225 mm2 Hang up the dehumidifierImportant • Do not place the dehumidifier close to a heating source, e.g. a radiator• Doors and windows must be kept closed when the dehumidifier is in function• To make sure that the room air passes freely through the dehumidifier, air inlet andair outlet openings must be freeAccess to thecontrolPlease follow this procedure to get access to the control:Step Action1 Dismount the front Remove the screws (2 pcs.) at the top of thedehumidifier. Lift up the casing and pull it horizontally away from thedehumidifier.2 Remove the screws on the front of the lid that is placed on top of thecompressor (the control is placed in that box)3 Push the lid against the back of the dehumidifier and pull it away from thebox. There is now access to the control.Continued overleaf