Dash Cam Cyclops 4SK108 User Manual
        | |
Contents | 
Operating Your Device:1) Charging:A) Using the built-in rechargeable lithium batteryCharging options: 1) Connect TODC CYCLOPS to the car charger; 2) Connect TODC CYCLOPS toyour computer using the USB cable- When charging through the car charger, the „battery‟ display in the bottom right of the screenwill flash – indicating that the unit is charging- A red light will illuminate on the left side of TODC CYCLOPS whenever the camera is chargingo (Note: For first charge a minimum of 6 hours is recommended)B) TODC CYCLOPS connected to the 12v car chargerWhen the 12v car charger is plugged into your vehicle‟s 12v outlet and TODC CYCLOPS is connected;after starting the vehicle, the device automatically turns on and enters video mode -- it will begin torecord. The device will continue recording while charging.** When the vehicle is turned off, the devicekeeps working and will turn off five seconds later, saving the recorded files automatically (if yourvehicle‟s 12v outlet stays active when the car is turned off, it is recommended to unplug your TODCCYCLOPS before leaving your car). Alternatively you can choose to turn the camera off using the powerbutton ; the files will be automatically saved.** Note: TODC CYCLOPS is designed to be plugged in continually while driving; leaving the unitplugged in for long periods of time will not harm the camera.2) Functions introductionThis camera has three modes: Video mode, Still Photo mode, Playback modeTo switch between modes, when the camera is NOT recording, press the MODE buttonA) Video mode: (a video camcorder icon will display in the top left of the screen . Memory cardmust be inserted)After pressing and holding the power button, or connecting TODC CYCLOPS to the car charger, thecamera turns on and enters video mode. TODC CYCLOPS will automatically begin recording. To stoprecording, press the OK button . To turn off the device, press and hold the power button . Whetheryou stop recording using the OK button or you simply power down TODC CYCLOPS using the powerbutton, your video will be stored.****Note: Pressing the OK button in video mode starts and stops recording.**Note: Pressing the mode button while TODC CYCLOPS is recording will lock and store thecurrent video – the top of the screen will display this lock key icon . This video will not beoverwritten until the memory card is formatted.**Note: A quick press (less than one second) of the power button while recording changes TODCCYCLOPS from day mode to night mode (the following icon will display on the top of the display screenwhen in night mode |
Related manuals for Dash Cam Cyclops 4SK108
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine