Data Aire DAMA-01 Installation, Operation And Maintenance Manual

Also see for DAMA-01: Installation, operation & maintenance manual

Data Aire DAMA-01 Installation, Operation And Maintenance Manual Manual pdf 30 page image

307.0 CONTROLS7.1 Standard ThermostatA single stage cooling thermostat is standard on all Mini Ceiling units. Units with either humidifiersand/or electric reheat require the Mini DAP-II, the Mini DAP-III or the Remote Mount DAP-III.7.2 Optional Programmable ThermostatOptional single stage cooling thermostat allows simple programmable functions. Units with eitherhumidifiers and/or electric reheat require the Mini DAP-II, the Mini DAP-III or the Remote MountDAP-III.7.3 Optional Mini DAP-II Microprocessor Control PanelThe Mini DAP-II microprocessor control panel is available on all Mini Ceiling units. There is a sepa-rate manual with extensive detail regarding the functions, features, programming and troubleshoot-ing.WARNING: The Mini DAP-II microprocessor control panel has an entire manual dedi-cated to its use and operation. The manual must be referenced to complete a thoroughunit installation. Start-up is not complete until the Mini DAP-II control panel settings areestablished.7.4 Optional Mini DAP-IIIThe Mini DAP-III is available as an option and offers additional features including remote commu-nications (with additional communication card options). There is a separate manual with extensivedetail regarding the functions, features, programming and troubleshooting.WARNING: The Mini DAP-III microprocessor control panel has an entire manual dedi-cated to its use and operation. The manual must be referenced to complete a thoroughunit installation. Start-up is not complete until the Mini DAP-II control panel settings areestablished.7.5 Optional DAP-IIIThe Remote Mount DAP-III is available as an option and offers additional features including remotecommunications (with additional communication card options) and analog inputs/outputs. Thereis a separate manual with extensive detail regarding the functions, features, programming andtroubleshooting.