Data Conversion Systems DCS VIVALDI DAC User Manual
                                    | |
Contents
| 
dCS Vivaldi DAC User Manual Software Issue 1.0xAugust 2012Filename: Vivaldi DAC Manual v1_0x.docx Page 24 English versionREMOTE CONTROLThe upper section of the Remote Control is mainly for the DAC, the lower section is for the Transport.Hold down the Sleep button for 2 seconds to set the system to sleepmode. Press the Sleep button again to return to normal operation.In Sleep mode, press the OFF button to turn the system off.The Upsampler Input button selects the Upsampler’s input. TheUpsampler Output button selects the Upsampler’s output sample rate.The Filter button changes the DAC filter setting.The Balance button toggles the DAC between Volume and Balanceadjustment modes.The AES1 button selects the DAC’s AES1 input, the AES3 buttonselects the DAC’s AES3 input.The Input+ and Input– buttons cycle through the DAC’s availableinputs.The Vol+ and Vol– buttons adjust the DAC’s Volume / Balance.Mute turns the DAC’s outputs off and on.The Program and Clear buttons are used with the 0 – 9 buttons to setor change the Transport’s track sequence for the loaded disc.The 0 – 9 buttons select the current track to be played by the Transport.Pressing 5 or 05 will select track 5.The Stop/Eject, Play/Pause, Previous Track, Next Track, Jog Backand Jog Forward buttons operate in the same way as those on theTransport front panel.The Repeat button cycles the Transport through Repeat 1 (repeat thecurrent track), Repeat (repeat the whole disc) and Repeat Off.The Display button changes the time displayed by the Transport, cyclingthrough Track Elapsed, Track Remaining, Disc Elapsed and DiscRemaining.When the system is completely off (not just in sleep mode), press the front panel Power buttons toturn it on. You cannot use the Remote Control for this. The OFF button will only operate if the systemis in sleep mode.If you are using the two Dual AES input pairs with a Vivaldi Transport and Upsampler,set the DAC’s two Dual AES menu pages to Lock. Now you can switch between the twoDual AES sources using the remote’s AES1 and AES3 buttons. |
Related manuals for Data Conversion Systems DCS VIVALDI DAC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine