Data Conversion Systems dCS Puccini U-Clock User Manual
               | |
Contents
| 
dCS Puccini U-Clock User Manual Software Issue 1.0xOctober 2008Filename: Puccini U-Clock Manual v1_0x.doc Page 7 English versionUsing the Puccini U-Clock with a Puccini PlayerConnect the system as shown below. You can use any of the U-Clock‘s four Word Clock Outputs andeither of the two SPDIF outputs.When playing a disc, make sure the U-Clock is set to 44.1kHz, so that the Puccini Player can lock to itand benefit from the improved clock quality.Set up the USB source as described on the next page and set the Puccini Player to the RCA1 input.When using a USB source, the U-Clock will set its clock frequency to suit the sample rate of the datastream on the USB input.RL R LAnalogue OutputsBalanced & UnbalancedTo preamplifier / power amplifierSUCLEFTRIGHTW/CLK~ 50/60 Hz, 40WFuse T 500mA LOUTdCS Model: Puccini PlayerRIGHTLEFTANALOGUE OUTPUTSRCA 1RCA 2INDIGITAL(PCM) O/PsDIGITAL(PCM) INPUTSRCA 1RCA 2UNBALANCEDBALANCED~ 50/60 Hz, 15WFuse T 500mA LdCS Model:Puccini U-Clock1SPDIFWORDCLOCKS OUT2 3 4 1 2 USBWindowsVista / XPor Mac OSXUSBRCABNCFigure 2 – Using the Puccini U-Clock with a Puccini Player! Puccini Player software v1.0x does not support locking to the Word Clock Input while anexternal input is selected. This is OK, as the USB source is locked to the U-Clock, butthere is room for improvement. We are planning a software update to address this forSpring / Summer 2009. |
Related manuals for Data Conversion Systems dCS Puccini U-Clock
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine