MIO-2261 User Manual 4Others1.2.3 Mechanical Specifications1.2.3.1 Dimensions (mm)L100.00 mm x W72 mm (3.9" x 2.8")1.2.3.2 Height on top (mm)15.7 mm (Heatsink)1.2.3.3 Height under bottom (mm)16.4 mm (Rear I/O USB)1.2.3.4 Weight (g)42g (0.93 lb, weight of total package)1.2.4 Electrical SpecificationsPower Supply Type: Single 12 V DC power input (support DC power hot plug)1.2.4.1 Power supply Voltage Single 12 V input ± 10% Total peripheral power supply output: 5 V @ 3 A for CPU board and MIOe mod-ule totally, 12 V @ 2 A for MIOe module1.2.4.2 Power Consumption Typical in Win7 Idle Mode:N2600: 0.35 A @ 12 V (4.2 W)N2800: 0.46 A@ 12 V (5.52 W) Max in Win7 HCT12 (10 minutes):N2600: 0.76 A @ 12 V (9.12 W)N2800: 0.80 A @ 12 V (9.6 W)1.2.4.3 RTC Battery Typical Voltage: 3.0 VEthernet Controller: Intel® 82583V (GbE1) Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE8023y, IEEE 802.ab Support 10/100/1000 Mbps Connectors: RJ45 LAN1 LED– Link: Green(100Mbps)/ Orange (1000Mbps)– Active: Green (flash) Support wake on LANSerial ports Controller: SMSC SCH 3114 2 x RS-232 serial ports with ESD protection: air gap ± 15 kV,contact ± 8 kVGPIO Controller: SMSC SCH 3114 8-Bit (programming) through Super I/O, pin header 5 V toleranceSMBus Default is SMBus, I 2 C support by request (share pin with SMBus)Data Modul AG - www.data-modul.com