Verifying the Operation of a Module513. For the Data Reduction Method, select Max so that the maximum value of the most recentbuffer is displayed for each channel.4. Leave the default values for the remaining parameters:− Precision = 2− Columns = 8− Display Update rate = middle of slider barConfigure the Appearance of the Statistics WindowConfigure the appearance of the Statistics window as follows:1. Ensure that the Visible Statistics column in the Plot and Data Config window is checkedfor both channels:2. If desired, hide the Plot and Data Config window by clicking the Auto-Hide pin ( ) inthe top, right corner of the window.Position the WindowsIf you want see the data that is displayed in the Channel Display, Channel Plot, and Statisticswindows at once, you need to move the windows to different locations in the display area.In the following example, the Channel Display window is located at the top of the displayarea, the Channel Plot window is located in the middle of the display area, and the Statisticswindow is located at the bottom of the display area:
