About this Manual10• Appendix A, “Specifications,” lists the specifications of the DT9847 Series module.• Appendix B, “Connector Pin Assignments and LED Status Indicators,” lists the pinassignments of the connectors on the DT9847 Series module, the screw terminalassignments of the STP15 screw terminal panel, and describes the LED status indicatorson the DT9847 Series module.• Appendix C, “Powering OEM Modules,” describes how to apply power to OEM modules.• Appendix D, “Register-Level Programming,” describes how to write to the registers of theDT9847 Series modules to change the default settings that are defined in the Open LayersControl Panel programmatically.• An index completes this manual.Conventions Used in this ManualThe following conventions are used in this manual:• Notes provide useful information or information that requires special emphasis, cautionsprovide information to help you avoid losing data or damaging your equipment, andwarnings provide information to help you avoid catastrophic damage to yourself or yourequipment.• Items that you select or type are shown in bold.Related InformationRefer to the following documents for more information on using the DT9847 Series module:• QuickDAQ User’s Manual (UM-24774). This manual describes how to create a QuickDAQapplication to acquire and analyze data from a DT-Open Layers data acquisition module.• DT-Open Layers for .NET User’s Manual (UM-22161). For programmers who aredeveloping their own application programs using Visual C# or Visual Basic .NET, thismanual describes how to use the DT-Open Layers for .NET Class Library to access thecapabilities of Data Translation data acquisition devices.• DataAcq SDK User’s Manual (UM-18326). For programmers who are developing their ownapplication programs using the Microsoft C compiler, this manual describes how to usethe DT-Open Layers DataAcq SDK to access the capabilities of Data Translation dataacquisition devices.• LV-Link Online Help. This help file describes how to use LV-Link with the LabVIEWgraphical programming language to access the capabilities of Data Translation dataacquisition devices.• Microsoft Windows 7, Windows 8, or Windows 10 documentation.• USB web site (http://www.usb.org)
