DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 011520197SpecificationsVIDEO/AUDIO INPUTSHDMI X4 HDMI 1.4vMini DIN X4 [Component & Composite Video / Audio input (combined)]VIDEO FORMATSResolution 1080p (H.264 Only), 1080i, 720p, 576p, 576i, 480p, 480iVIDEO / AUDIO COMPRESSIONVideo Codes MPEG-2 MP@HLVideo Codecs H.264 (HD) > 1080p30, HP@Level 4.2 / ≤1080p30, HP@Level 4 >720p30, HP@Level 3.2 /≤720p30, HP@Level 3.1Video Codecs H.264 (SD) Frame rate > 30, MP@Level 3.1 / ≤30, Level 3Audio Codecs MPEG-1 Layer II / AAC / AC-3 pass throughVIDEO BitrateMPEG-2 SD: 1 to 8Mbps / HD: 10 to 15.7MbpsH.264 SD: 1 to 4Mbps / HD: 4 to 8MbpsRF OutputChannel Plan Varies by countryOutput Level +40 dBmVOutput Impedance 75 ohmLevel Adjustment 0~-20dBModulation Modes 256 QAM / 64 QAMQAM Type DVB-C Annex BChannel Allocation Type IndependentVCN Mode 3 Modes supportedMER 43dB typicalIPStreaming Protocols UDP/RTP Unicast, MulticastStream Types 4 SPTSStream Control Enable / Disable control per streamConnector 1 GbE IP streamASI SupportStream Type Single output (1 MPTS stream carrying up to 4 programs)EAS SupportConnection Dry contactAudio/Video Input DINGeneralLocal Monitoring LED system indicators (Power & 4 Encoder status LEDs)Web Management 1 RJ-45 10/100 ManagementGUI Supported Microsoft Edge, Firefox, Chrome, SafariPassword Protected GUI: ChangeableFan Cooled InternalPower Supply 12VDC 7.5 AmpConsumption 34W typicalDimension 482.7mm x 286mm x 44.2mm / 1RU 19” EIA(Housing Body: 438mm x 286mm x 44.2mm)*Subject to change without notifications