Data Video HS-1200 Instruction Manual

Data Video HS-1200 Instruction Manual Manual pdf 32 page image

32Level (EBU/SMPTE/AUTO): There are two different audio standards available for selection. The user caneither select the EBU or SMPTE standard. By selecting AUTO allows the device to automatically detect theaudio standard.GPI OutThis allows the user to perform GPI configuration. After turning on the GPI, select the GPI mode, which iseither level or pulse. The pulse width can also be configured in the sub-option Width (1-9). GPI out canthen be assigned to one of Inputs 1-6 and the delay can be set to between 1 and 99. This feature could beused to trigger playback from an external playback device such as Datavideo’s NVP-20 or HRS-30 unit.MultiviewerAutoNum: The Multiview windows can be automatically numbered, and this sub-option turns ON/OFFautomatic numbering.Label Inf: This sub-option turns ON/OFF Label information. Input label is followed by information whichdescribes the input as still, live or frozen image.Trns Lab: This sub-option turns ON/OFF Label Transparency. Once enabled, the background of the label isthen turned from a solid colour to transparent.5.8 StillsStill allows the user to load images from the memory, save images to the memory, and save the imagescaptured.Advanced ModeStills Load Still Load Still Num 13 Input 5ThumbnailPicture - 1 Thumbnail Picture Thumbnail Picture+ 1Save Still Save Input 5 Still Num 13Freeze 1 Still 2 Live 3 Still4 Still 5 Still 6 LiveBasic ModeStills Load Still Load Still Num 13 Input 5ThumbnailPicture - 1 Thumbnail Picture Thumbnail Picture+ 1Save Still Save Input 5 Still Num 13Load StillUpon selecting “Load Still”, the user can then choose the memory location from which the still image isloaded. The following are the destinations to which the still image can be loaded:• Input 6• Input 5• Input 4• Input 3• Input 2• Input 1

/ 43