DataCard SP25 Plus Printer Manual

Also see for SP35 Plus: Supplementary guide Datasheet Supplementary guide Brochure Brochure & specs

Contents

DataCard SP25 Plus Printer Manual Manual pdf 46 page image

Page 41Cleaning the printer rollersThe printer rollers move the card during printing operations. Clean therollers, using the cleaning pen supplied with the printer, when problemsoccur such as:• Repeated card jams• Cards are not being picked, repeatedly• Colors are not aligned on the printed card1 Clean the pick roller:a Open the input hopper and remove all cards from the inputhopper.b Remove the cap from the cleaning pen. Hold the end of thecleaning pen against the pick roller.c Use the LCD panel to run a cleaning card. See “Cleaning theprinter” on page 39. Do not insert a cleaning card! The printermoves rollers when it attempts to pick the card.d Move the cleaning pen over the surface of the pick roller.e Lightly wipe any dirt from the end of the cleaning pen onto aclean cloth or paper. Move the cleaning pen to another area ofthe roller.f Repeat steps c through e until no more dirt appears on the pen.2 Clean the permanent cleaning rollers (at location 1) following thesame procedure used for the pick rollers.