MODEL 1980 SERIES PRINTER OPERATION AND MAINTENANCEDataMetrics Corporation 204.5.1.3. Rear Paper-Guide Areaa. Open the rear access cover of the printer.b. Open the rear paper guide/tray.c. If the leading edge of the media has reached the output (top) area, pull the releaselever located on the fuser and pull the paper out the top. If the media has not reachedthe top of the printer, pull the release lever and pull the paper out the back of theprinter.d. Close and secure the hinged paper guide at the rear of the print engine.e. Close and secure the top cover of the printer.4.6. ShutdownThe printer enters standby mode when no data is being received from the host computer. Itis not necessary to power down the printer when the unit is not used for limited periods.When the printer is to be taken out of service, perform the following shutdown sequence:a. Ensure that the printer is not receiving data from the host computer.b. Place the printer power switch in the “off” position.