DataOn Storage CiB-9224 V12 Technical Manual
Also see for CiB-9224 V12: Tech manual
                                    | |
Contents
| 
CiB‐9224 V12 User Manual222.3.2 To install the power supplyInsert the replacement power supply firmly into the bay. The retaining clip should snap. Connect theAC power cord to the replacement power supply.Figure 2-6 Installing the Power Supply2.4 2.5” SAS HDD / SSDThe CiB-9224 V12 support up to 24 x 2.5” hot-pluggable SAS HDD / SSD. You don’t need to power-offthe system when removing or installing a HDD / SSD.The location of 2.5” SAS HDD / SSD assemblies on the system is shown below:Figure 2-7 2.5” SAS HDD / SSD Locations Take note of the drive tray orientation before sliding it out. Tray will not fit back into the bay if inserted incorrectly. |
Related manuals for DataOn Storage CiB-9224 V12
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine