Chapter 14. DM4000 ETH2x10GXCAUTION:"Risk of explosion if battery is replaced by an incorrect type. Use only cell type CR2032. Dispose of usedbatteries according with local regulations."14.2. Front Panel DescriptionDM4000 ETH2x10GX front panel contains 2 XFP ports and port status LEDs.Figure 14-2. DM4000 ETH2x10GX - Front PanelWARNING:"When performing installation and maintenance operations of optical fibers, you should not stand closeor look directly into the fiber outlet with unaided eyes."WARNING:"Electrostatic generated by human body may damage the electrostatic sensitive components on the equip-ment."WARNING:"This interface board supports a 3.15A fuse, type T (delay), 250V. If necessary, replace it only for anotherone of the same type and value."55
