VS-1200 Data Acccess Switch18© 2009 Datacom Systems Inc4.1.2 Password RecoveryPassword Recovery is provided for cases where a user has forgotten the Superuser and/orAdministrator login password. Password recovery is accomplished by connecting to the unit seriallyusing a HyperTerminal like program and rebooting the unit. As the power-up sequence is occurring,depress . Upon receipt of this command, a text recovery key will be generated anddisplayed prior to the prompt. This key is used to reset the passwords. An example recovery keyprompt is: 617A6185774$You must call Datacom Service Center with this recovery key in order to obtain the requiredresponse to reset passwords. Given a valid reset response, the factory default passwords will besaved in Non-Volatile memory. If an invalid response is given, a new recovery key will be calculatedand displayed at the prompt, as described above, after first clearing the screen.4.1.3 Basic Commands (Read Only Access)The following section shows the long form of the basic command set with the shortcut input for thecommand noted in parenthesis. All commands, either the exact long form or the shortcut form, areentered after the prompt (default >) at the cursor. No auto-fill mode is available. After the topicheading, a brief overview of the command display function is given followed by an example(Example: >) command input.4.1.3.1 HELP (HE) or (?)When this command is entered, a list of commands, their shortcut inputs, and their descriptions willdisplay. For the use and application of each command, refer to the individual command descriptionwithin this section. The HELP command displays the available commands as shown:Example: > ?Available commands:HELP HE / ? Show HelpEXIT EX Exit ShellSHOW SH Show All Current Configurable ValuesSHOW PRODUCT SH PR Show Product Name and Serial NumberSHOW TIME SH TI Show System Date and TimeSHOW MANAGEMENT SH MA Show Management ConfigurationSHOW PORT CONFIG SH PO CO Show Port ConfigurationSHOW PORT ROUTING SH PO RO Display Routing SummarySHOW GROUPS SH GR Show Group ConfigurationSU SU Enter Superuser ModeSU SET PASSWORD SU SE PA Set Superuser PasswordSHOW USERS SH US Display UsersSET IP SE IP Set IPSET SUBNET SE SU Set Subnet MaskSET GATEWAY SE GA Set Default GatewaySET PROMPT SE PR Set Command Prompt (max 32 bytes)SET DATE SE DA Set System DateSET TIME SE TI Set System TimeSET PORT NAME SE PO NA Set Port Name (max 32 bytes)SET PORT SPEED SE PO SP Set Port Speed
