Datalogic 94ACC0175 Instructions Manual
  |
INSTRUCTIONS©2017 Datalogic S.p.A. and/or its affiliates. All rights reserved.Datalogic and the Datalogic logo are registered trademarks of DatalogicS.p.A. in many countries, including the U.S. and the E.U. Rhino is atrademark of Datalogic S.p.A. and/or its affiliates. All other brand andproduct names may be trademarks of their respective owners.www.datalogic.com94ACC0175 Quick Change V-MountGeneral FeaturesWith the Quick Change V-Mount it is possible to easily remove or install the VMC on VESA or RAMmounts without the usage of any tools.Please note that the Quick Change V-Mount is not compatible with 94ACC0164 UPS Battery Backupwith Speaker.The pack contains the following components1. 1x base plate2. 1x ram or vesa plate3. 8x M6x16 screws allen key4. 3x M5x12 screws allen key5. 8x spring washers M66. 8x washers D6.47. 3x M8x16 counter sunk screws8. 3x spring washers M59. 3x washers D5.310. Allen tool 4 & 5Assembling Quick Change V-Mount on the VMCThe quick mount base plate (2) is installed on the backside of the VMC (1). To fasten the base plateuse 4 M6x16 (3) screws. On each screw install a spring washer (4) and a washer (5). Torque each ofthe 4 screws with 10 Nm.6135 |
Related manuals for Datalogic 94ACC0175
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine