Datalogic DS2100 Installation Manual

Also see for DS2100: Installation manual

Datalogic DS2100 Installation Manual Manual pdf 16 page image

DATALOGIC DS2100Installation - 2.32.3 ELECTRICAL CONNECTIONSSeveral DS2100 models are equipped with a cable terminated by a 25-pinfemale D-sub connector for connection to the power supply and input/outputsignals. The details of the connector pins are indicated in the following table:Figure 2.3 - 25-pin female D-sub connector25-pin D-sub connector pinoutPin Name Function13 VS Power supply input voltage +25 GND Power supply input voltage -1 CHASSIS Chassis Ground9 VS External Triggersupply voltage +18 EXT TRIG+ External Trigger +19 EXT TRIG- External Trigger -8 OUT1 + Output 1 +11 OUT2 + Output 2 +12 OUT REF Output reference22 OUT REF Output reference20 RXAUX Auxiliary RS23221 TXAUX Auxiliary RS23223 CTSAUX Auxiliary handshake RS23224 RTSAUX Auxiliary handshake RS2326, 10, 14, 15,16, 17NC Not ConnectedPin RS232 RS485full-duplexRS485half-duplex20mA C.L. *(optional)2 TX232 TX485+ RTX485+ CLOUT+3 RX232 RX485+ CLIN+4 RTS232 TX485- RTX485- CLOUT-5Maininterfacesignals,see par.2.3.2. CTS232 RX485- CLIN-7 SGND SGND SGND* available as an optional interface board.