DS4800 REFERENCE MANUAL1STEP 5 – INSTALL GENIUS™ CONFIGURATION PROGRAMGenius™ is a Datalogic scanner configuration tool providing several important advantages:• Wizard approach for new users;• Multi-language version;• Defined configuration directly stored in the reader;• Communication protocol independent from the physical interface allowing to consider thereader as a remote object to be configured and monitored.To install Genius™, turn on the PC that will be used for the configuration, runningWindows 98, 2000/NT, XP or Vista, then insert the Genius™ CD-ROM, wait for the CD toautorun and follow the installation procedure.This configuration procedure assumes scanner connection to a CBX100/500. Genius™,running on a laptop computer, is connected to the scanner auxiliary port through theCBX100/500 9-pin connector. To communicate with the scanner, Genius™ performs an autobaudrate detection starting from its default parameters which are 115200, 8, N, 1. Theseparameters can also be set in the Genius™ Tools>Options>Communications window.Wizard for Quick Reader SetupAfter installing the Genius™ software program the following window appears asking the userto choose the desired configuration level.Figure 9 - Genius™ Wizard Opening WindowThe Wizard option is advised for rapid configuration or for new users, since it shows a step-by-step scanner configuration.10