Datalogic DS6300 Reference Manual

Also see for DS6300: Quick reference guide Quick reference guide Reference manual Reference manual Reference manual

Contents

Datalogic DS6300 Reference Manual Manual pdf 55 page image

INSTALLATION 2ENT<<ENT<<12Main Serial InterfaceAuxiliary Serial Interface* P.S. (Presence Sensor) connected to External Trigger/PS input.Figure 54 – Pass Through Connection for Fieldbus Models2.7.3 RS232The RS232 mas n anetwork consistiThe Sla e scan escanner transmi .All messages wihe master scanner is connected to the Host PC on the main RS232 serial interface throughe C-BOX 100 (20 mA C.L. can be used if the INT-30 accessory is installed).In RS232 Master/Slave connections the External Trigger signal is unique to the system(single P.S.).Master/Slaveter/slave connection is used to integrate a DS6300 reader (all models) ing of different scanners not provided with a Lonworks interface.ners use RS232 only on the main and auxiliary interfaces. Each slavvts the messages received by the auxiliary interface onto the main interfacell be transferred towards the master.TthNOTEThe DS6300 master/slave scanner model (DS6300-10X-010 only),working as Master in an RS232 network, may be simultaneouslyconnected to a Lonworks network consisting of DS6300 slave scanners.Be careful when assigning the slave address, since the number of the firstLonworks slave must be a progressive number with respect to theaddress number defined for the last slave scanner of the RS232 network.For example, if the RS232 network consists of Slave 1 and Slave 2, theaddress to be assigned to the first Lonworks slave scanner will be Slave 3(not Slave 1).Remote HostGryphonDS6300C-BOX 100DS4600AP.S.* P.S.*DS4600AC-BOX 100C-BOX 100PWR-1202 1 2 1AUXCAB-601XFieldbusworkP.S.*Net41