Datalogic DS6300 Reference Manual

Also see for DS6300: Quick reference guide Reference manual Quick reference guide Reference manual Reference manual

Contents

Datalogic DS6300 Reference Manual Manual pdf 7 page image

viiCOMPLIANCEELECTRICAL SAFETYThis product conforms to the applicable requirements contained in the European Standard forelectrical safety EN-60950 at the date of manufacture.WARNINGThis symbol refers to operations that must be performed by qualifiedpersonnel only. Example: opening the device.LASER SAFETYThe following information is provided to comply with the rules imposed by internationalauthorities and refers to the correct use of the DS6300 scanner.Standard RegulationsThis scanner utilizes a low-power laser diode. Although staring directly at the laser beammomentarily causes no known biological damage, avoid staring at the beam as one wouldwith any very strong light source, such as the sun.Avoid that the laser beam hits the eye of an observer, even through reflective surfaces suchas mirrors, etc.This product conforms to the applicable requirements of both EN60825-1 andCDRH 21 CFR1040 at the date of manufacture. The reader is classified as a Class 2 laserproduct according to EN60825-1 regulations and as a Class II laser product according toCDRH regulations.There is a safety device, which allows the laser to be switched on only if the motor is rotatingabove the threshold for its correct scanning speed.WARNINGUse of controls or adjustments or performance of procedures other than thosespecified herein may result in exposure to hazardous visible laser light.The laser light is visible to the human eye and is emitted from the window on the head of thescanner (Figure A).