COMMON FEATURESMechanical Installation:The DS6500 reader can be positioned and installed in the best way possible as a result of the Step-A-HeadTMfeature. Thanks to the separation between Head and Base, you can modify the orientation of the decoder base,and therefore display-keypad and connector panels, while keeping the optic head in the correct reading position.The reading head and the decoder base can be rotated independently from each other allowing the installationeven in the most critical locations.To rotate the head follow the given procedure:1. detach the head from the base by unscrewing the four fixing screws;2. rotate the head in the desired position;3. loosen but don't remove the two screws on top of the head;4. affix the head onto the base carefully aligning the four fixing screws andprogressively tightening them about half-way;5. completely tighten the two screws on top of the head;6. completely tighten the four fixing screws. Step-A-Head™ Feature4.334.45110113993.907630742.991.182.858516.5303.340.65602.361.18mminch====823.22200.78501.96180.71 N°2250.98100.4 220.86421.65Ø4.1 N°2Ø0.16 N°24.5 N° 4 SLOTS0.18 N°4 SLOTS823.22501.96351.37501.96722.831003.9340.151305.121264.96106°73.22.88361.418.5 N°2 SLOTS0.33 N°2 SLOTSØ8.5Ø0.33mminchDS6500 Overall Dimensions ST-237 Mounting Bracket Overall Dimensions3.35 0.65 2.36 1.183.902.724.112.504.344.012.20 4.484.457.08mminch306085 16.5104.563.5699911311456110.3102180R36R22R5R11.650.4 0.860.980.713.221.960.785.110.160.430.55 0.552.833.930.431.961.961.370.151.412.95 mminch4210 221825205013082Ø4.11414 72501001111503543675Ø8.5DS6500 Oscillating Mirror Model Overall Dimensions ST-210 Mounting Bracket Overall DimensionsFixingScrew (4)Head Screws26