ELF™44.6 DATA CAPTURE CONFIGURATIONYou can configure the Elf’s decoding options by tapping Start -> Settings ->System -> Decoding.There are two sections in the Decoding control panel, each containingadditional pages. There are six General Configuration pages and multipleBarcode symbology pages.4.6.1 Configuration Control PanelsSelect the desired configuration from the options shown in the figure below, andthe other Decoding Properties figures on the following pages.Select General or 1D Bar Code, then use the menu or tap the left and rightarrow keys to navigate the different pages of the Decoding utility. The menuoptions will change to reflect the items most recently selected.44
