Datalogic Gryphon Quick Reference

Also see for GRYPHON: Reference manual Reference manual

Contents

Datalogic Gryphon Quick Reference Manual pdf 15 page image

PEN READER CONFIGURATIONRead the restore default code, then read the pen interfaceselection code.RESTORE DEFAULTÌ$+$*oÎPENÌ$+CP6$-BÎDEFAULT VALUESUSB DEFAULT SETTINGSDATA FORMAT : code identifier disabled, no field adjustment,code length not transmitted, character replacement disabled.USB KEYBOARD : USA keyboard, FIFO enabled, inter-character and inter-code delays disabled, USB keyboardspeed normal.USB COM: no handshaking, delay disabled, rx timeout 5 sec.,ack/nack disabled, FIFO enabled, serial trigger lock disabled.Default Headers and Terminators for each USB mode:- USB-KBD: no header, terminator = ENTER- USB-KBD-ALT-MODE: no header, terminator = CR- USB-COM: no header, terminator = CR-LF- USB-IBM-TABLE TOP: not applicable- USB-IBM-HAND HELD: not applicableRS232 Standard DEFAULT SETTINGS9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking,delay disabled, rx timeout 5 sec., ack/nack disabled, FIFOenabled, serial trigger lock disabled.DATA FORMAT : code identifier disabled, no field adjustment,code length not transmitted, no header, terminator = CR-LF,character replacement disabled.RS232 Nixdorf DEFAULT SETTINGS9600 baud, parity odd, 8 data bits, 1 stop bit, handshakinghardware (RTS/CTS), delay disabled, rx timeout 9.9 sec.,ack/nack disabled, FIFO disabled, serial trigger lock disabled.DATA FORMAT : code identifier enabled, no field adjustment,code length not transmitted, no header, terminator = CR,character replacement disabled.