LYNX™ D2The field of view indicated by the aiming system will be smaller when the Lynx™ D iscloser to the code and larger when it is farther from the code. Symbologies withsmaller bars or elements (mil size) should be read closer to the unit. Symbologieswith larger bars or elements (mil size) should be read farther from the unit. (Seechapter 8 for further details).2.2 NORMAL OPERATIONLynx™ D normally functions by capturing and decoding codes.Point the reader at the target and pull the trigger partially to enable the aimingsystem. Then, pull it completely to capture and decode the image. The reader willrepeatedly flash until the symbol is decoded or timeout is reached. In between theflashes of the reader, the aiming system keeps on showing the field of view on thetarget (see Figure 2).As you are reading code symbols, adjust the distance at which you are holding thereader.NOTEThe Lynx™ D hand-held reader aiming system is designed forgeneral reading and decoding of 1D and 2D symbols. Some variationin reading distance will occur due to narrow bar width and otherfactors.NOTEe barcode and/or set theCamera Control parameters (see page 50).If reading codes positioned on reflective surfaces, it may benecessary to tilt the reader with respect to th.3 IMAGE CAPTURING2Lynx™ D can alsnd other items.o function as a camera by capturing images of labels, signatures,t read another Capture Image Code of the samer a different Preset Configuration.aIn order to capture an image, the user should read a Capture Image code (seepage 72), then point at the image subject and pull the trigger. This way, the imagewill be captured and sent to the host PC. Lynx™ D then returns to normal operation.To capture another image you muso4
