USE AND FUNCTIONING934Setting a PasswordTo set a password:1. Enter a password in the field. This allows the user to specify a password whenthis utility is launched. By default the password is “1234”.Be sure to record the Password for future reference.NOTE2. Re-enter the password in the second field.3. Select/tap “Set Password” to enable the password.4. Select/tap “OK” to close the “Set Password Confirmation” dialog.You must select/tap “Set Password” prior to exiting DDU in order tostore and activate your new password. It is not necessary to select“Enable Datalogic Desktop”.NOTEIf you select/tap “Set Defaults” it will remove all custom settings andrestore all the factory default settings, except a previously setpassword.CAUTIONChanging a PasswordTo change to a new password:1. Enter a new value in the “Enter Password field”.2. Re-enter the new value in the “Re-enter Password” field.3. Select/tap “Set Password”.
