Label IDProduct Reference Guide 4-5Label IDA Label ID is a customizable code of up to two ASCII characters (00-FF), used to identify a barcode (symbology) type. See Appendix D, Default Settings, for a listing for common symbologies. Itcan be appended previous to or following the transmitted bar code data depending upon howthis option is enabled. This feature provides options for configuring custom Label IDs individu-ally per symbology. If you wish to program the scanner to always include an industry standardlabel identifier for ALL symbology types, see the previous feature, AIM ID.To configure a Label ID:1. Scan the START bar code.2. Select Label ID position as either BEFORE or AFTER by scanning the appropriate barcode.3. Scan a bar code to select the symbology for which you wish to configure a custom LabelID.4. Determine the desired character(s) (you may choose either one or two) which will repre-sent the Label ID for the selected symbology. Next, turn to the ASCII Chart on the insideback cover of this manual and find the equivalent hex digits associated with your choice ofLabel ID. For example, if you wish to select an equal sign (=) as a Label ID, the chart indi-cates its associated hex characters as 3D.5. Turn to Appendix C, Alpha-Numeric Pad and scan the bar codes representing the hex charac-ters determined in the previous step. For the example given, the characters ‘3’ and ‘D’would be scanned.6. Scan the END bar code to exit programming mode.Figure 4-4. Label ID Position OptionsORPrefix SuffixLabel ID Label IDBar Code DataAim ID
